Posted on 2 Comments

The singles’ club…for socks

Today I’m talking about – of all things – odd socks. The good thing about textiles is that they are highly recyclable. Old jeans and jackets can be used to make bags, or re-cover chairs. Odd socks, not so much. Old textile products can be ground up to make insulation and wadding, so there is that option. But let’s see what else we can do with them.

The Singles’ Club

A permanent feature in the Romeis household is The Singles’ Club. This little basin is the repository for socks which inexplicably emerge from the laundry without their mates. When it starts to get a little full, someone (usually me – it’s my favourite chore) will go through it and perform a mass wedding ceremony, as long lost partners are reunited.

When the children were little, I used to make up stories about the socks as I paired them up. Sometimes socks would look as if they belonged together, when they didn’t. And sometimes I would find that I was inadvertently trying to match up one of Mommy’s white sports socks with one belonging to one of the boys. All of this would get woven into the narrative. If Mr Namasi was in earshot, there might be a carefully ribald joke or two that would – in the manner of children’s theatre since time out of mind – sail right over the head of the youngsters and occasionally (if Mommy was very witty) cause coffee to mysteriously emerge from Daddy’s nose.

Inevitably, some of the socks are never reunited with their partners. And what do we do with those?

If your family is anything like mine, wearing mismatched socks is an option. I know one young lady who just slings all her socks into a drawer and wears the first two that come to hand each day. But I find wearing socks of different thicknesses irritating, so I don’t do that. That said, a black sock with red heel and toe can safely be worn with a black sock with yellow heel and toe from the same 3-pack. No-one is going to see the heels and toes, after all. A yellow googly-eye sock can happily be worn with a pink googly-eye sock from the same pack. The socks are daft to begin with. Wearing different coloured ones is somehow within the bounds of acceptable eccentricity – even with a suit, if you do it with aplomb.

Sock doll

But it’s the socks that just can’t even be ‘mismatched up’ that are the problem. So here are some uses:

  • If they’re made from natural fibres, you could use them to buff your shoes. This works particularly well if you stuff one sock with a few others.
  • Adopting the same approach of popping a few socks inside another one, will give you a great defogger for the inside of the car windscreen. Once again, it’s best to go with natural fibres here, or you’ll just end up smearing the condensation around inside of wiping it away.
  • They also make great duster-gloves. Just pop one on your hand and wipe down the various surfaces that need dusting.
  • Any sock, natural fibres or not, can be used to protect shoes when packing.
  • Pop a bar of soap inside a sock and tie it to your outside tap for washing your hands when working outdoors. Just remember to cover it when it rains, and you should probably bring it indoors in the rainy season.
  • Socks make great covers for golf club heads.
  • Or how about a pair of kneepads for your crawling infant?
  • I have a friend who makes a nifty hair bun using socks. I never acquired the skill when my hair was longer, but then I have never been able to ‘hair’ very well. Here’s a link for those with more skill than me in this area.
  • If you have a very small dog and a large sock, you can make a jacket for your pooch with little hassle.
  • Then, of course, there are the myriad sock dolls and puppets to be found on Pinterest. I’ve had a go at a few of these myself, and they are rather cute. The one shown here is one I made.
Posted on Leave a comment

Re-using that plastic: bottle caps

Let me start this post with a reminder that the overall idea is to reduce the amount of plastic we use. That will inevitably reduce the amount of plastic waste we generate. The ideal is a zero plastic lifestyle.

It surprises me that I actually have to point this out, but reaction to previous posts in the series makes it clear that I do: none of the ideas shared in this series about reusing plastic are meant to encourage readers to go out and buy products in order to get their hands on the plastic items needed. Quite the contrary. If you decide you’d like to build a greenhouse out of 2 litre pop bottles, I can almost guarantee that you won’t need to buy a single bottle of pop yourself. Put a call out on your local Facebook group. Send an email out to your friends and family. Go door to door down your street, and chances are you’ll have enough bottles to build a double storey house… although I wouldn’t recommend it.

Okay, now that that’s out of the way, we can move on to the intended subject of this post: the reuse of plastic bottle caps. This is the last in this series. From next week, I’ll be looking at something other than plastic for a while.

The real bummer with plastic caps is that they are less widely recycled than the bottles they seal. Please check to see whether your local recycling service recycles PP (pop bottle caps) and HDPE (sometimes used for milk/fruit juice). If they don’t, you’ll need to separate them out from your trash. If you sling a bottle-with-cap into the recycling in an area where the caps are not recycled, there is a good chance that this will be seen as ‘mixed plastic’ and will be removed. At that point, landfill is a very real possibility.  If your local recycling centre doesn’t recycle this kind of plastic, there are some charities that do. Do a quick Internet search to see if there are any such services in your area.

So, what are we going to do with the little blighters?

Bottle top floor tiles

Some of the projects I shared in my post about reusing pop bottles, include the lids, so I won’t repeat those. But do have a quick (re)read to see whether there’s anything there for you. Other ideas include:

I have also seen ideas for Christmas decorations, and even jewellery. And, if you’re anything like me, each new thing you see will foster ideas of your own. What I love about this era is how much people are willing to share their skills and ideas. There’s a generosity among creative people that warms the cockles of my heart.

Until next time.

Posted on 1 Comment

Reusing that plastic: fizzy drink bottles

Fortunately, the plastic used to make fizzy drinks bottles (PET) is widely recycled. But we are trying to reduce our output, so this post will focus on alternative uses for them. And they are legion!

Sadly, bottle caps (PP) are less widely recycled. Many of the projects shared here include the caps, and I will look at some separate uses for them in a separate post.

Lighting

In places without an electricity mains supply, drinks bottles have been used to provide indoor lighting, using the principle of refraction. In my native South Africa, this technique has made an enormous difference to children in informal housing settlements, struggling to complete homework by the light of a kerosene lamp (which is both unhealthy and dangerous). Obviously, in a wealthy country like the UK, the call for this lighting method isn’t particularly great. It also helps to have some sunlight to refract, and we know that there are times of the year when that is in short supply here. However, if you’re an outdoorsy, roughing-it type, you might find it useful. So here‘s how to make your own.

As a variation on the theme, simply strapping a headlamp to a drink bottle filled with water will create an instant lantern. As long as you remember to point the light inward towards the bottle, of course, so that it can be refracted! This works very well with milk bottles (HDPE) too.

Based on this concept, the ‘Liter of Light‘ project has transformed lives in some of the poorest parts of the world, as well as those hit by natural disaster.

Gardening

The humble plastic bottle can also be pressed into service in your garden. They can be used for wall gardening (see picture), hydroponicscloches, and seedling propagation. They can be pressed into service to keep the slugs away from your veggies, the wasps away from the outdoor living space, and the mozzies away from your blood. Do, however, bear in mind that traps for ‘baddie’ insects might also kill some of the good guys, so do weigh up the pros and cons before installing them willy-nilly.

They can even be used to build greenhouses (or summerhouses).

You can use them to make bird feeders for both seed eaters and nectar drinkers (and probably insectivores, if you put your mind to it).

You can make a sprinkler and a bird shower. I’m not sure whether those two belong in the gardening section, to be honest. Pets and children are just as likely to enjoy them!

Air conditioning

Like the lighting solution, this one might not have as much application to the UK as to some hotter climes. But feast your eyes on this brilliant use of recycled plastic bottles, a board, and the laws of thermodynamics, to make an air conditioner that uses no electricity.

Crafting activities

Madonna and child – reclaimed materials (and polyfilla)

This is a rather miscellaneous list of craft activities which involve plastic bottles:

As you may know, plastic bottles formed part of the Madonna and child figures (see picture) made during the workshop I conducted in December. I have also seen extremely complex and sophisticated fairy villages made using plastic bottles as a base.

It seems, from the practical and functional to the whimsical and purely decorative, there is a use for these bottles.

Until next time.

 

Posted on Leave a comment

Re-using that plastic: Doorstop

Yesterday, I posted about the various steps we can take to reduce our plastic. I promised that I’d provide some upcycling/reuse suggestions. This is the first: you can use plastic jars to make doorstops.

This is actually a commissioned project that I worked on this very morning, so it’s hot off the press.

You will need:

  • A fairly large empty plastic jar, preferably with lid
  • Something to weigh it down with
  • Some kind of covering for the jar
  • Glue or a needle and thread to hold everything together

That’s all a bit vague, isn’t it? Have a read through the rest of the process and you’ll get the idea.

The jar

When I was 10 years old, one of our ‘housecraft’ projects was to make a doorstop. This involved using 4 needles to knit a cover for a 500ml Coke bottle. By dint of (ahem) clever embroidery and the placement of pompoms, the covered Coke bottle was transformed into a (ahem again) ‘beautiful’ Poodle. The bottle was half filled with sand to weigh it down before its Poodle cover was stitched in place.

The thing is, a Coke bottle has a pretty small base, which doesn’t make for much stability. Also 250ml of sand doesn’t weigh a lot, and can’t hold a door in place in the face of a determined Eastern Cape easterly wind. I’m here to tell you that the wind will move the door anyway. The bottle will fall over, and the sand will leak through the knitting and your mother will not be impressed. This is not the desired outcome.

Instead, choose a large jar with a broad base. I chose this one. I didn’t even take the label off. It does have a lid, even though it’s not in the picture. We’ll come back to that.

 

The weight

We have already established that 250ml of sand isn’t going to do the trick. So what is? Well here is why I was so vague before. You could use sand – just more of it. You could use plaster of paris. You could use stones. You could use discarded weight plates from your neglected garage-gym. You could use gold bullion. Heck you could even use water, as long as you have a lid for your bottle. Water weighs 1kg per litre – that’s pretty respectable.

I used plaster of Paris purely because I had some available.

Once you’ve added weight to your jar, you can put the lid on. A couple of pointers here:

  • If you’re using water as your weight, I suggest you seal the lid in place with silicon or hot glue or plumber’s tape or some such
  • If you’re using plaster of Paris, wait until the plaster has set before putting the lid on – setting plaster is exothermic and needs room to breathe

The cover

Now, because this is a commission, I got a bit fancy here. You can do what you like. You could even leave it as it is, if you prefer. Or you could paint it.  Or decoupage it. Or cover it with wallpaper.  You could wrap it in a cast-off item of clothing, knotted at the top.

This is what I did.

  • First, I measured the circumference of the jar (at its widest point)
  • I cut a piece of calico wide enough that it would overlap slightly when wrapped around the jar, and long enough so that it would extend slightly beyond the top and the bottom of the jar. Because I used a piece of calico that had come off one of those pine-and-calico wardrobe thingies, the piece I cut was already hemmed on two sides. Win. If you want to hem yours, go ahead. If not, don’t.
  • I then, you’ll be astonished to learn, covered the jar with the calico. I used hot glue. You could sew yours, and slide the jar in.
  • I folded the top of the calico over the closed lid of the jar and glued it in place. I did the same at the base. You could catch it with a needle and thread, if you prefer.
  • Because I want my client to be able to pick the doorstop up easily, I decided to give it a secure handle. I used some of the tapes from the aforementioned pine-and-canvas wardrobe thingy for this. I cut two lengths that would be long enough to go under the base of the jar like stirrups, with enough left at the top to tie secure knots. I glued the straps across the bottom of the jar, laying them across each other like the strings around a parcel. Then I tied them all together at the top. Note: the are no joins at the bottom – that wouldn’t be secure. I’ll come back to those loose ends in a bit.
  • I cut a piece from a scarf I had picked up from a charity shop. It’s in blues and oranges, with a lovely pompom fringe, and I’ve been dying for an excuse to use it for a project. I cut it long enough so that I could fold it over the base as I had done with the calico, while leaving a cheerful pom-pom-y fringe at the top. The scarf was wide enough to go around the jar and then some, but I didn’t I cut the extra width away, because the more of an overlap there was, the more pompoms there’d be. Win.
  • I wrapped the scarf around the jar. When it overlapped, I just kept going. Then I glued the end in place.
  • I folded the excess over the base. This time I used a needle and thread to catch it all together. Then I cut a circle of calico, which I placed over all that untidiness. Just for a little touch of why-not-ness, I blanket stitched around the edge of the calico circle. I need to make a note about this base. Please see the * at the end of the post.
  • Now for the finishing touches. I gathered the top into a bunch, including the loose ends of the calico tapes, and tied some coloured tape tightly around it like a ponytail. I used the four loose ends of the calico to make two loops, which I stitched (glue might not hold the weight), so that the new owner can hook a finger or two through them to move the doorstop.

And here is the completed doorstop, earning its keep. You can make yours as plain or as fancy as you like. You could give it ears and googly eyes and turn it into a creature of some kind. Let your imagination run riot. Have fun. 

* The base of the jar I chose is concave, which means that it remains stable in spite of the fact that I folded quite a lot of fabric over the bottom and glued it in place. If you’re using something with a flat base, you’d be better off not folding fabric under, but cutting it off level with the base, gluing it in place, and then adding some kind of trim around the bottom.

Posted on Leave a comment

Plastic and you (and me)

You have almost certainly heard of the proliferation of plastic pollution that is slowly suffocating the planet. Especially if you watched the final episode of the BBC’s Blue Planet II, narrated by the one and only David Attenborough.

When plastic was first invented, the fact that it was virtually indestructible was a major plus. Now that we’re unable to get rid of the stuff, and we’re finding it in remote locations, and in the gizzards of animals who live far away from human habitations, we’re a little less convinced. The problem is, it’s so damned convenient… in the short term, at any rate.

I’ve seen a few threads lately, where people have been happy to report that they put all their plastic into the recycling, so their consciences are clear. And, of course, they should be. Sadly, the authorities taking care of that recycling have not always been entirely transparent or above board in their disposal techniques. Part of that is because the volume of plastic we’re generating is just too great to be coped with. Especially since China has decided they’re no longer going to be the dumping ground for the world’s garbage.

So now what? What can I do? I’m only one person!

You’re absolutely right, of course. And, as coincidence would have it, so am I. In fact, everybody is only one person. And what you can do is no less than what anyone else can do. Here is a list of some measures you can introduce to reduce the amount of plastic waste you generate.

  1. Take your own bags when you go shopping. Those plastic shopping bags are an absolute scourge! And don’t use those really flimsy plastic bags provided for fruit and veg (they just rip, anyway!). If the supermarket has a weigh-your-own option, just stick the label to one of the pears/potatoes/whatever. Or weigh the loose items, pop them into a reusable bag, and hand the printed label(s) to the cashier. If they don’t have such an option, the cashier is perfectly capable of weighing loose items.
  2. Switch to nappies/diapers that are plastic-free, and ideally reusable. There is a growing supply of these, and you’ll save money in the long run. The volume of disposable nappies being thrown away is a major contributing factor in plastic waste, particularly in the USA.
  3. Carry a reusable bottle with you – preferably not a plastic one – and refill it, rather than buying bottled water. This, of course, only works if you’re somewhere where the water quality can be trusted. You can also use your refillable container instead of the dreadful little plastic cups in waiting rooms up and down the land (particularly the NHS – what up with that?)
  4. Take your own container when you go to a restaurant, if you’re likely to take your leftovers home with you. If your restaurant refuses to play ball, take your future business elsewhere, but chances are they’ll have no problem with it.
  5. Stop using straws. If possible, go without altogether. But if you absolutely have to have a straw, it is possible to buy reusable ones. I will grant you that they’re not cheap. I will also acknowledge that it isn’t always easy to get bars and restaurants on board with this one. I recently asked for my drink to be served without a straw, but it arrived with one anyway.
  6. Rethink the way you pack your lunch. Reusable containers are the way forward.
  7. Lobby your government and your supermarket to do something about excess plastic packaging on foods, or shop somewhere that doesn’t pre-package everything up the wazoo. Some customers have resorted to removing the plastic packaging and leaving it at the store. The good news is that this approach makes the supermarket take ownership of the amount of plastic they’re generating. The bad news is that they’re likely to dispose of it in the cheapest way possible, which is unlikely to be to the benefit of the environment.
  8. Take your own cup to the coffee shop if you’re ordering your coffee to go. Yes, I know that most coffee places use paper cups, but those lids are plastic. You might even get a discount for taking your own cup. If your current coffee place doesn’t offer a discount, take your business somewhere that does – the little independents are usually pretty switched on.
  9. Switch to detergents and household cleaning products that come with a refillable option. This a growing trend, so check your locality to see if there are any outlets near you that will allow you to take and refill your own containers, charging by weight for what you take.
  10. If there is a choice between a plastic bottle and a carton, take the carton. If there is an option for a glass container, take that. This applies to all sorts of products, including food and drink.
  11. Use matches instead of plastic lighters. Or get a refillable metal lighter.
  12. Steer clear of plastic cutlery. I know that’s not always possible when you grab a meal on the fly from the roadside services. But perhaps you could get into the habit of keeping a metal spork in your car, and one in your desk drawer.
  13. Avoid microbeads. Don’t assume that it’s just beauty products that contain them, either. Some of the heavy duty hand cleaning products used in workshops and by gardeners contain microbeads too. Check the label for polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET), polymethyl methacrylate (PMMA), polytetrafluoroethylene (PTFE) and nylon. There are alternative products available, and you can even make your own – Pinterest is your friend!
  14. Consider making your own household cleaning products. Once again, Pinterest is your friend. It’s less complicated than you might expect.
  15. Re-use your plastic items. Over the next while, I’ll be posting a few ideas and suggestions for crafty items you can make, using reclaimed plastic. Watch this space.

Of course, this list is not exhaustive. It’s also not always possible to do all these things. But let’s have a crack at it.